Raleigh

Expert GE Appliance Repair Services

arrow
Mon-Sat 8:00am - 6:00pm
(984) 382-9657
10% Discount for schedule online.

General Electric is one of the most established and recognized names in home appliances. While GE appliances are built to last, time and regular use can lead to breakdowns and reduced efficiency. Our team provides expert in-home GE appliance repair, regardless of the model’s age or place of purchase.

With years of experience servicing GE appliances — from refrigerators and washers to built-in ovens and microwaves — we deliver precise diagnostics, use genuine parts, and work to restore your appliance’s performance quickly and reliably.

GE Appliances We Service

  • Refrigerators: Side-by-side, French door, bottom freezer, and models with ice makers
  • Washers and Dryers: Front-load, top-load, and stackable units
  • Dishwashers: Built-in and standard-sized units
  • Ovens, Ranges, and Cooktops: Gas, electric, and induction models
  • Microwaves: Countertop and built-in types
  • Freezers and Wine Coolers: Standalone or integrated systems
  • Washer-Dryer Combos: Compact and full-size combined units

GE: Built to Perform, Still Needs Service

GE appliances are known for quality engineering and long-term reliability. Many models continue working for decades. However, like any appliance, they eventually develop symptoms of wear — reduced performance, odd noises, or control issues — that indicate a need for service. Even dependable GE units require occasional repair or maintenance to ensure safe and smooth operation for years to come.

Full Range of GE Appliance Types We Repair

  • GE Dryer
  • GE Washer
  • GE Refrigerator
  • GE Dishwasher
  • GE Microwave
  • GE Freezer
  • GE Range
  • GE Oven
  • GE Cooktop
  • GE Ice Maker
  • GE Stacked Laundry
  • GE Washer-Dryer Combo
  • GE Trash Compactor
  • GE Range Hood

Common GE Appliance Issues

GE Refrigerator Symptoms

  • Not cooling or uneven temperature: If your fridge isn't keeping food cold or certain sections are warmer than others, it could indicate compressor problems, airflow blockages, or sensor malfunctions. This can quickly lead to spoiled food and higher energy bills.
  • Ice buildup in the freezer: Frost forming along walls or food items may suggest a faulty defrost system, door seal issues, or airflow obstructions. Left unaddressed, it can reduce storage space and cooling efficiency.
  • Loud or unusual noises: Clicking, buzzing, or rattling sounds may point to fan motor wear, loose components, or compressor strain. These are early warning signs of future mechanical failure.
  • Running constantly without pausing: Continuous operation may mean the refrigerator is struggling to maintain the set temperature due to thermostat or seal problems — increasing energy consumption and wearing out parts prematurely.
  • Water or ice dispenser not working: If the dispenser is unresponsive or only partially functioning, it could be due to frozen lines, valve issues, or control board faults — often linked to irregular maintenance or water filter neglect.

GE Washer Issues

  • Fails to spin or rinse clothes properly: This could be caused by motor issues, a faulty lid switch, or imbalance sensors failing to activate the spin cycle — resulting in soaking wet laundry after a full wash.
  • Stuck mid-cycle or doesn’t finish washing: If the cycle halts, the problem may lie in the control board, timer, or water-level sensors. It's frustrating and may lead to moldy or half-clean clothes.
  • Leaks during operation: Puddles under or behind the machine could signal damaged hoses, a worn door seal, or an internal tub crack — all of which should be addressed promptly to avoid water damage.
  • Water not filling or draining: A slow or unresponsive water cycle often means the inlet valve, drain pump, or pressure switch isn’t functioning correctly — and can interrupt wash performance entirely.
  • Excessive vibration or shaking: Strong shaking or banging sounds during spin cycles are typically due to unbalanced loads, leveling issues, or worn suspension components — which can damage nearby flooring over time.

GE Dryer Problems

  • Clothes remain damp or take too long to dry: If your dryer isn't effectively removing moisture, the culprit could be a clogged vent, heating element failure, or sensor malfunction. Poor drying leads to repeated cycles and wasted time.
  • Drum not spinning: A non-turning drum may suggest a broken belt, seized motor, or failed start switch. This prevents any drying from occurring and requires prompt repair.
  • Overheating or burning smell: An overheating dryer poses a serious fire hazard. It often stems from restricted airflow, faulty thermostats, or failing thermal fuses — don’t ignore this warning sign.
  • Unusual thumping or squealing noise: Loud or high-pitched sounds can be early signs of bearing wear, misaligned drum parts, or foreign objects in the drum — issues that worsen over time if neglected.

GE Dishwasher Symptoms

  • Water not draining after cycle: Standing water in the bottom of the tub usually indicates a clogged filter, blocked drain hose, or malfunctioning pump — which can lead to odors and mold growth.
  • Dishes remain dirty or cloudy: Poor cleaning results might point to spray arm blockages, incorrect detergent use, or heating issues — meaning your dishwasher isn’t completing its job efficiently.
  • Cycle won’t start or gets stuck: If your dishwasher doesn’t respond or stops mid-wash, the door latch, control board, or float switch could be at fault. These issues often require diagnosis to isolate.
  • Leaks from the door or bottom: Visible water on the floor suggests gasket wear, misaligned doors, or loose plumbing connections — which should be fixed before causing cabinet damage.
  • Error codes on the display: When the control panel shows error codes, it’s the appliance’s way of flagging electrical or mechanical malfunctions. Interpreting these codes requires technical experience.

GE Microwave Issues

  • Microwave doesn’t heat food: If your unit turns on but fails to warm anything, the magnetron, diode, or high-voltage capacitor may be faulty — a common but high-voltage-sensitive issue.
  • Turntable not rotating: A non-spinning tray can result in uneven cooking and usually points to a worn motor, broken coupler, or disconnected drive mechanism.
  • Buttons or timer unresponsive: If the control panel isn’t reacting, the touchpad or main board may be to blame. This is especially frustrating and often leads to full control loss.
  • Sparking inside the chamber: Sparks or arcing while in use are often caused by metal fragments, damaged waveguide covers, or food splatter — and should be inspected immediately to avoid internal damage.

Frequently Asked Questions

Is it worth repairing an old GE appliance?
+
Yes, in most cases it's worth repairing GE appliances under 10–12 years old. GE is known for producing durable machines, and many models function well with timely repairs. If the repair cost is less than half the price of a new unit, it's generally the smarter choice.
How much does it typically cost to repair a GE refrigerator?
+
GE refrigerator repairs usually range from $109 to $400. The final cost depends on the part that failed - such as a thermostat, compressor, or fan - and the complexity of installation. Diagnostics help determine the exact issue and whether the fix is cost-effective.
How soon can I get a technician for GE appliance service?
+
In most areas, appointments are available within 24–48 hours. We prioritize urgent breakdowns and often offer same-day visits, depending on technician availability and your location. Early scheduling increases your chances of getting a faster slot.
Do GE appliances require specific replacement parts?
+
Yes, genuine GE parts are recommended for optimal performance. Using OEM parts ensures compatibility, safety, and longer-lasting repairs. Generic or mismatched components may not function correctly and can void manufacturer warranties.
Why is my GE washer shaking violently during spin cycles?
+
Excessive shaking is often caused by unbalanced loads or worn suspension rods. If ignored, it may damage internal parts or flooring. It's important to have the washer leveled and inspected to avoid worsening the problem.
What does it mean if my GE dishwasher won’t drain?
+
It usually means the drain pump, filter, or hose is blocked. Standing water after a cycle can also be caused by a failing check valve. Addressing drainage issues early helps prevent mold, odor, and possible motor strain.
How long do GE dryers typically last?
+
On average, GE dryers last 10–13 years with regular maintenance. Replacing filters, clearing lint vents, and avoiding overloading can extend their lifespan. If heating or spinning becomes inconsistent, a repair may restore performance.
What are common signs my GE microwave needs repair?
+
Lack of heat, sparking, or an unresponsive keypad are warning signs. GE microwaves often fail due to magnetron or control board issues. These symptoms require attention, as high-voltage components can pose safety risks.
Can I repair a GE appliance myself?
+
Minor tasks like replacing filters or cleaning can be done by homeowners. However, diagnosing and repairing internal components should be left to professionals due to electrical risks and warranty concerns. DIY fixes often lead to more costly issues.
How can I prevent future problems with my GE appliances?
+
Schedule regular maintenance and avoid overloading or misusing your appliances. Keep filters and vents clean, replace worn seals, and have a technician check for early wear every 1–2 years. Preventive care is key to avoiding expensive breakdowns.
arrow
Mon-Sat 8:00am - 6:00pm
(984) 382-9657
10% Discount for schedule online.
We are working on your request, and soon our manager will contact you. Thank you for your understanding!